Hi, this is my first post of probably many to come, I am a novice and have only had my gear a couple of months, I always use the auto setting on the camera so far with the flash, but the other day somehow the locking pin in the hotshoe got stuck so I dissasembled the flash to get it off, in doing so I disconnected the green wire so resoldered it, but when I tried it the flash works but is either too early or too late?? I wouldnt think it was anything I did unless I changed a setting but on auto I wouldnt have thought so. Any ideas?
- CHAT TO OTHER PHOTOGRAPHERS ON THE FRIENDLY FORUM
In these troubled times it is good to talk. If you want to stay in touch with other EOS photographers, this forum is here to help. In addition to the many photo categories, 'The New EOS Pub' is a safe space to post and read messages about anything (but please steer clear of religion and politics). The forum is free. Register now if you are not already a member.
If you are new to forums, details about how to post and other useful information can be found in the FAQ section
A LITTLE LIGHT READING
If you want to learn more about photography while isolated at home, click https://www.eos-magazine.com/Magazine/subscribe.html
This will show how you can access digital editions of every copy of EOS magazine back to 2006 - nearly 60 issues!
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
- The forum software has been updated, if you see any javascript errors, the suggestion from vBulletin is to clear your browser cache and try again.