Re: Cheap as chips studio set up - I hope!
That does sound like a plan nickorando, but I get so confused by the huge number of choices.
If you get a moment, could you send me a link to a suitable flash?
Thanks
Colin
Announcement
Collapse
No announcement yet.
Cheap as chips studio set up - I hope!
Collapse
X
-
Re: Cheap as chips studio set up - I hope!
Originally posted by Colin Vicary View PostThanks nickorando.
I only have the two flashes (apart from the built-in) The 420EX and the 420EZ - and I really wanted to use them for the backdrop.
Is there a setting on the camera I need to change to use the sync cable? NB, this isn't a hotshoe sender, just a plain sync cable to the flash.
Colin
If it doesn't, you will need to replace the cable and/or slave unit. You know it works optically, so a cheap flash for a fiver off Ebay is possibly your quickest and cheapest fix.
Leave a comment:
-
Re: Cheap as chips studio set up - I hope!
Thanks nickorando.
I only have the two flashes (apart from the built-in) The 420EX and the 420EZ - and I really wanted to use them for the backdrop.
Is there a setting on the camera I need to change to use the sync cable? NB, this isn't a hotshoe sender, just a plain sync cable to the flash.
Colin
Leave a comment:
-
Re: Cheap as chips studio set up - I hope!
I don't think the built-in flash works except in ETTL mode, which includes a pre-flash. If your cable isn't working, then you could use any small flash without E-TTL in the hotshoe as a flash trigger.
Leave a comment:
-
Cheap as chips studio set up - I hope!
Hi there everyone.
Our product guy at work has just bought an ebay home studio for our product shots. The kit is great, good backdrop, lights are adequate etc.
However, I've now been asked to help with "white-ing" out the backdrop, and I've run out of skill.
I'm using a 40d, and I have a 420EX and a 420 EZ. I bought some optical triggers, which work ok, but are firing too early. I tried to find out how to turn off the pre-flash from the camera, but without much luck.
I have a flash sync cord that plugs into the side of the camera and a connector of the optical trigger - but I can't get the flash to fire.
Can anyone help solve my dilemma? Work don't really have the budget for a canon wireless flash controller ST-E2, we could send chocolate though!
Thanks
ColinTags: None
Leave a comment: