Hi, I am looking for an adhesive for the rubber coating of my 5Dlll. The coating has started to peel at the top right hand side rear of the camera by the three buttons. Before proceeding and making a mistake I would appreciate on a good strategy recommendation. Aluminium and rubber compound? Many thanks, Mike
Announcement
Collapse
No announcement yet.
Glue, that is right glue!
Collapse
X
-
Glue, that is right glue!
Mike in South Australia
Cameras
EOS 5Dlll and EOS 5DII
Lens Tamron 24-70mm f2.8, and 70-200mm f2.8, Canon EF 17-40mm L f4, Canon EF 200mm L f2.8, Canon EF 50mm f1.8, TCs x1.4 II and x2 II, 12mm extender.
Equipment Manfrotto Tripod with Really Right Stuff ball head, Speedlite 430EX and Yongnuo YN568EX, plus other bits and pieces.Tags: None
-
I had this happen to one of my past camera's, think it was the 40D. I just used a dab of superglue - did the trickTrev
Equipment - According to the wife more than a Camera Shop got
Flickr:
https://www.flickr.com/photos/trevb2639/
Comment
-
1300L is used to glue the de ice boots onto the wings of the aircraft which are aluminium, but I think you might find that a bit of overkill.Canon 1DX, 50D, EF500 F4.0 L, EF100-400 f/4.5-5.6L I , EF100-400 f/4.5-5.6L II, EF70-200 f/2.8L II, EF180 f3.5L Macro, EF 24-105 f/4L, EF17-40 f/4L, EF2.0X III, EF1.4X III, 430EX II, MR-14EX...
Comment
-
Many thanks guys for responding. Rob Scott has suggested I use double sided tape! I have now and, it seems to work! Many thanks Rob. I have noticed that the lifting" part hides a very small screw head - to what I have no idea and would be scared to enquire!
Again my thanks, MikeMike in South Australia
Cameras
EOS 5Dlll and EOS 5DII
Lens Tamron 24-70mm f2.8, and 70-200mm f2.8, Canon EF 17-40mm L f4, Canon EF 200mm L f2.8, Canon EF 50mm f1.8, TCs x1.4 II and x2 II, 12mm extender.
Equipment Manfrotto Tripod with Really Right Stuff ball head, Speedlite 430EX and Yongnuo YN568EX, plus other bits and pieces.
Comment
Comment