Announcement

Collapse
No announcement yet.

Troubleshoot: over exposing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Troubleshoot: over exposing

    I'm a relative newbie with my 450d having had it for 18 months. Previously it shot well in bright sunlight on automatic; now it makes everything far too light. I'm not looking for advice really that says turn off the automatic - my wife will never switch to anything else - but trying to figure out why there is this sudden difference. I've been through the manual and can't find anything that would address this difference. Is my camera broken, or have I mangled a setting?

    #2
    Re: Troubleshoot: over exposing

    I'd guess it's most likely a change in the settings Ian. If you have a look through the camera's menu/settings, there should be an option to reset it to the defaults.
    Canon EOS 5D Mark III, EF 135mm F/2 L, EF 16-35mm F/4 L, EF 50mm f/1.8, EF 24-105mm f/4L IS USM, EF 28mm f/2.8
    http://www.aveyardphotography.co.uk
    https://www.flickr.com/photos/aveyardphotography
    https://www.facebook.com/AveyardPhotography

    Comment


      #3
      Re: Troubleshoot: over exposing

      I'd check whether you've set some Exposure Compensation accidentally.

      Sorry, don't know how to check that on that model of camera, but when you look through the eye piece and half press the shutter, check where the exposure meter is at!

      Also might be worth checking whether you've changed to spot or other metering, although it should probably NOT be that... worth checking tho!

      Mike
      flickr
      5D4 : 7D2 : 16-35 f4 L : 24-105 II L : 70-200 f2.8 L : 100-400 II L : Macro 100 f2.8 L : Manfrotto CX055 Pro3

      Comment


        #4
        Re: Troubleshoot: over exposing

        Hello Ian and welcome.

        My first thoughts are the same as Mike's, you have set exposure compensation by accident. If you look at your camera's manual under "Exposure Compensation", you will find out how to set it and therefore do the reverse to unset.

        Hope that works for you, if not, comeback to us and we'll try again.
        Colin

        Comment


          #5
          Re: Troubleshoot: over exposing

          - Or ISO set too high if previously on auto?

          Comment

          Working...
          X