I've just had delivered a set of yonguno 603's with the C1 cable for use in my 650d.
The transceivers appear to work fine and will fire my yn467 as they should. What I'm struggling with its getting the units to work as a shutter release.
The C1 cable is connected to one of the units and the camera. When pressing the release on the second unit the led goes red on both tranches but the camera doesn't fire.
I've not used a wired remote before but borrowed a friend this morning that works on his 350d but can't get to work on my 650? Is the C1 socket on my camera faulty or do I need to adjust camera settings in order to use the remote? :confused:
Tried in manual mode just incase AF lock was the issue, but no joy! :(
The transceivers appear to work fine and will fire my yn467 as they should. What I'm struggling with its getting the units to work as a shutter release.
The C1 cable is connected to one of the units and the camera. When pressing the release on the second unit the led goes red on both tranches but the camera doesn't fire.
I've not used a wired remote before but borrowed a friend this morning that works on his 350d but can't get to work on my 650? Is the C1 socket on my camera faulty or do I need to adjust camera settings in order to use the remote? :confused:
Tried in manual mode just incase AF lock was the issue, but no joy! :(
Comment